Expert Support
Available 24/7 via chat
Vacuum Pump
-
Enables suction lift (pulling water from below the pump level) because the vacuum pump evacuates air/air-liquid mix and allows the main pump to draw fluid. For example, suction lifts up to 28 ft (or more in some cases) when using the priming system.
-
Fully automatic priming/re-priming: Once set up, the system can prime and re-prime without manual intervention.
-
Handles air/liquid mixtures and some solids: this is useful in dewatering, slurry, dredging or similar messy jobs.
-
Environmentally safe priming: The float box plus diaphragm vacuum pump means no water carry-over and reduced contamination risk.
-
Better hydraulic efficiency thanks to oversize suction design: less friction loss, higher flows.
-
Original price £0.00 - Original price £0.00Original price £0.00£345.00£345.00 - £345.00Current price £345.00
Vacuum Pump Crank Housing
Replacement Cornell and Pioneer Crank Housing replaces Pioneer Part Number 33601311 Compatible with Pioneer and Cornell Vacuum Pumps
Original price £0.00 - Original price £0.00Original price £0.00£345.00£345.00 - £345.00Current price £345.00Sold out -
Original price £39.00 - Original price £39.00Original price£39.00£39.00 - £39.00Current price £39.00
Vacuum Pump Bearing Cap Shaft End
Fits both Cornell and Pioneer Vacuum Pumps 33602316
Original price £39.00 - Original price £39.00Original price£39.00£39.00 - £39.00Current price £39.00Sold out -
Original price £532.00 - Original price £532.00Original price£532.00£532.00 - £532.00Current price £532.00
Suction Chamber Posi Valve for Pioneer
In stockVacuum Posi Valve for Pioneer 106003704C Recommend Changing Float Linkage and Gasket
Original price £532.00 - Original price £532.00Original price£532.00£532.00 - £532.00Current price £532.00Sold out -
Original price £17.00 - Original price £17.00Original price£17.00£17.00 - £17.00Current price £17.00
Vacuum Pump Exhaust Valve Stud
In stockAftermarket CNC Machined Replaces Pioneer Part Number 33621321 Replaces Cornell Part Number A20602-32-SD **Item Not Included in Rebuild Kit
Original price £17.00 - Original price £17.00Original price£17.00£17.00 - £17.00Current price £17.00Sold out -
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00
Vacuum Pump Pedestal O-Ring
In stockBuna Oring Replaces Pioneer Part Number 30147238 Replaces Cornell Part Number A15251V-59-EB
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00Sold out -
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00
Vacuum Pump Bearing Cap Oring (Set)
In stockBUNA Rubber Material Replaces Pioneer Part Number 30147231
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00Sold out -
Original price £0.00 - Original price £0.00Original price £0.00£154.00£154.00 - £154.00Current price £154.00
Vacuum Pump Crankshaft
In stockAftermarket Machined Part Replaces Pioneer Part Number 33614323 Replaces Cornell Part Number B40307-14-SP
Original price £0.00 - Original price £0.00Original price £0.00£154.00£154.00 - £154.00Current price £154.00Sold out -
Original price £17.00 - Original price £17.00Original price£17.00£17.00 - £17.00Current price £17.00
Vacuum Pump Stud Assembly
In stockReplaces Part Number 33600102 Sold as a Set of 4
Original price £17.00 - Original price £17.00Original price£17.00£17.00 - £17.00Current price £17.00Sold out -
Original price £0.00 - Original price £0.00Original price £0.00£39.00£39.00 - £39.00Current price £39.00
Vacuum Pump Bearing Cap Shaft End (Closed)
In stockFits both Cornell and Pioneer Vacuum Pumps Part Number 33602317
Original price £0.00 - Original price £0.00Original price £0.00£39.00£39.00 - £39.00Current price £39.00Sold out -
Original price £192.00 - Original price £192.00Original price£192.00£192.00 - £192.00Current price £192.00
Vacuum Pump Pedestal
In stockFits both Pioneer and Cornell Vacuum Pump Replaces Pioneer Part Number 33601312
Original price £192.00 - Original price £192.00Original price£192.00£192.00 - £192.00Current price £192.00Sold out -
Original price £12.00 - Original price £12.00Original price£12.00£12.00 - £12.00Current price £12.00
Inspection Plate Gasket
In stockReplaces Cornell Part Number A20589-197-EB
Original price £12.00 - Original price £12.00Original price£12.00£12.00 - £12.00Current price £12.00Sold out -
Original price £115.00 - Original price £115.00Original price£115.00£115.00 - £115.00Current price £115.00
Vacuum Pump Actuator Shaft
In stockAftermarket Machined Aluminum Fits Both Cornell and Pioneer Vacuum Pumps 33627612 Pioneer Part Number
Original price £115.00 - Original price £115.00Original price£115.00£115.00 - £115.00Current price £115.00Sold out -
Original price £7.00 - Original price £7.00Original price£7.00£7.00 - £7.00Current price £7.00
Vacuum Pump Housing Bolts
In stockReplaces Pioneer Part Number 335689
Original price £7.00 - Original price £7.00Original price£7.00£7.00 - £7.00Current price £7.00Sold out -
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00
Vacuum Pump Cotter Pin
In stockStainless Steel Construction FITS BOTH CORNELL AND PIONEER VACUUM PUMPS Replaces Pioneer Part Number 33021103
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00Sold out -
Original price £7.00 - Original price £7.00Original price£7.00£7.00 - £7.00Current price £7.00
Vacuum Pump Actuator Shaft Lip Seal
In stockFits Actuator Shaft for Pioneer and Cornell Vacuum Pump DURUS Lip Seal Pioneer Part # 30500107
Original price £7.00 - Original price £7.00Original price£7.00£7.00 - £7.00Current price £7.00Sold out -
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00
Bearing Washer for Vacuum Pump
In stockAftermarket Machined Aluminum Replaces Pioneer Part Number 32000101 Replaces Cornell Part Number A14566C-363-SK
Original price £2.00 - Original price £2.00Original price£2.00£2.00 - £2.00Current price £2.00Sold out -
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00
Vacuum Pump Crankshaft Bearing Locknut
In stockAftermarket Machined Aluminum Replaces Pioneer Part Number 32100101 Replaces Cornell Part Number A14568C-129-SK
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00Sold out -
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00
Vacuum Pump Actuator Shaft Guide Bushing
In stockSteel Bushing with Teflon coating
Original price £4.00 - Original price £4.00Original price£4.00£4.00 - £4.00Current price £4.00Sold out -
Original price £192.00Original price £192.00 - Original price £192.00Original price £192.00Current price £154.00£154.00 - £154.00Current price £154.00
Cornell Vacuum Pump Rubber Kit (Elastomer Kit)
Kit Includes: Inlet/Outlet Valves, Actuator Valve, Actuator Seal, Neck Seal, Inlet Nozzle Gasket, Pedestal O-Ring, Bearing Cap O-Rings Cornell Part...
View full detailsOriginal price £192.00Original price £192.00 - Original price £192.00Original price £192.00Current price £154.00£154.00 - £154.00Current price £154.00Sold out -
Original price £92.00 - Original price £92.00Original price£92.00£92.00 - £92.00Current price £92.00
Cornell/Pioneer Vacuum Pump Belt (450H100)
Vacuum Pump Belt for Cornell and Pioneer pumps Cornell-6NHTA, 8NHTA, 8NHTH, 8NNT, and 12NNT Pioneer-PP88S12, PP63C17 PP64S17, PP108S17, and PP128S22
Original price £92.00 - Original price £92.00Original price£92.00£92.00 - £92.00Current price £92.00Sold out -
Original price £92.00 - Original price £92.00Original price£92.00£92.00 - £92.00Current price £92.00
Cornell/Pioneer Vacuum Pump Belt (360H100)
Vacuum Pump Belt for Cornell and Pioneer pumps Cornell- 4NNT and 6NNT Pioneer-PP44S10, PP66S12, and PP66S14
Original price £92.00 - Original price £92.00Original price£92.00£92.00 - £92.00Current price £92.00Sold out -
Original price £661.00Original price £661.00 - Original price £661.00Original price £661.00Current price £219.00£219.00 - £219.00Current price £219.00
Vacuum Pump Pully and Tapered Lock Bushing Kit
Fits both Cornell and Pioneer Vacuum Pumps Kit Includes: 60 Tooth Pulley Tapered Bushing Bolts (X3) Lock Washers (X3)
Original price £661.00Original price £661.00 - Original price £661.00Original price £661.00Current price £219.00£219.00 - £219.00Current price £219.00Sold out
